SNAP-TEX-MR10-16
- Документация и файлы:
- Загрузить
The SNAP-TEX-MR10-16 breakout board is designed for high-current switching of outputs through SNAP digital output modules. The board includes 16 mechanical relays, one for each point, that can switch up to 10 A per point. (Without the breakout board, SNAP digital output modules can switch up to 0.75 A per point.)
The SNAP-TEX-MR10-16 includes on/off indicators for each point, and each point can be wired for normally closed or normally open. The board requires 24 VDC power.
The MR board is usually used with four 4-channel digital output modules such as the SNAP-ODC5-i and the SNAP-ODC5SRC, and four SNAP-TEX-CBO6 cables.
Alternatively, the board can be used with the high-density SNAP-ODC-32-SRC digital output module. Use a SNAP-HD-CBF6 cable and two boards for the 32-point module.
The SNAP-TEX-MR10-16 includes on/off indicators for each point, and each point can be wired for normally closed or normally open. The board requires 24 VDC power.
The MR board is usually used with four 4-channel digital output modules such as the SNAP-ODC5-i and the SNAP-ODC5SRC, and four SNAP-TEX-CBO6 cables.
Alternatively, the board can be used with the high-density SNAP-ODC-32-SRC digital output module. Use a SNAP-HD-CBF6 cable and two boards for the 32-point module.
For reference: Modules, Cables, and Breakout Boards Compatibility Charts
NOTE: A replacement relay, the SNAP-MR10, is available.
Build your system in the SNAP I/O Configurator.
Наличие на складах
-
Склад - Санкт-Петербург
остаток: 0
